How to replace the blade for Kataba 10.5 inch (265mm)

How to replace the blade for Kataba 10.5 inch (265mm)

Replacing a blade is easy! If the blade is chipped or dull, please replace it.

The only things to keep in mind are to use dedicated replacement blades for each saw and to avoid injury.

In this article, we will show you how to change the blade for Kataba 10.5" (265mm).

 

  1. Hold the base of the blade back with the teeth facing up. Strike the handle to remove the blade.

  2. After attaching a new blade, hold the base of the blade back with the teeth facing down.

  3. Strike the handle again so that the blade and handle are in a straight line.

NOTES:

・Each saw has a dedicated replacement blade. For the handle of Kataba 10.5", only blades for Kataba 10.5" can be used.
・Please be careful not to hurt yourself.
・Kataba for Europe has a small gap between the steel spine and the blade, but there is no problem using it.


SUIZAN Replacement Blade for Japanese Saw 10.5 Inch Kataba (Single Edge) Pull Saw

ブログに戻る